Noble Trading

The A-Frame Racking system provides an economical means of display and storage in a vertical configuration of products that are of an irregular length.Example: Timber dowelling, plastic pipes, aluminium extrusions, wood panelling etc. 

Beam Safety Clips are designed to reduce the risk of a beam disengaging from the upright of a frame. These clips are made from high tensile steel with an electroplated process to reduce rusting. 

A bracing block / spacer is used when a single brace meets a frame upright or post.It prevents the frame from being crushed when bracing is tightened. 

Cantilever Racking is a cost effective system designed for products that are long, irregular and awkwardly-shaped. Example : Doors, packs of timber, plastic pipe for plumbing, steel tubing etc. 

Column Guards are used to reduce the potential damage to pallet racking systems caused by forklift operations. The protectors are designed in several different styles to best suit all types of pallet racking applications. 

The Double Deep Pallet Racking system is designed on the principal of first-in-last- out rotation. It provides greater warehouse capacity with same stock situations and is adjustable to meet your individual requirements. 

The Drive-In Pallet Racking system is a continuous block of racking, not divided by aisles. These systems provide a first-in-last-out stock rotation and are designed to maximise storage capacity, while minimising the use of floor space. 

Drum/Cable Racking is a system designed to provide direct access to rolls of cable by using fixed and interchangeable levels, thus optimising every available space. 

Footplates or Base plates are a very important aspect of pallet racking, as they are used to provide a point of support for the pallet rack upright to be fixed to the concrete floor and provide weight support for the entire frame. 

Frame Bracing refers to the diagonals and horizontals that tie the posts together, thus forming a frame. The different bracing combinations are used to provide the appropriate strength to the frame. 

Frame Posts/Uprights are a component of the frame. Each post is punched and formed with locating holes into which the beams lock.They are available in four types. 

Frame Ties are used to secure frames in back to back and double deep applications. They provide the recommended space required between each frame for a standard pallet. 

Frames are the uprights of a racking system. The basic frame consists of a pair of uprights, horizontal and diagonal frame braces, bracing bolts, bracing blocks, base plate and fixing. 

Levelling Plates are designed to assist in the levelling of a racking system. They are positioned between the floor surface and a frame footplate or base plate, thus solving the problem of a floor surface with slight imperfections and irregularities. 

Maintenance and Load Safety Signs are a mandatory requirement with the installation of every new pallet racking system, where the racking is greater than 300 square metres, or the height of the top beam level is greater than 4500mm from the ground. 

Narrow Aisle Pallet Racking is designed to provide direct access to all pallet loads based on the same principle as Selective Racking. It maximises aisle space while allowing full access to all stock through the means of guided forklifts. 

Particle Board Retainers are used to secure particle board to each shelf level and provide a method of positively locating particle board decking without any permanent type of fixing. 

Post Pallet Channels serve as guide for pallet boxes, mesh cages and other containers with legs or feet. The skid channels lock over the standard racking beams and can be adjusted along the beams to suit every style of post pallet box. 

Loadmaster Rack Protectors are designed to reduce potential damage caused by forklift operation. The protectors achieve this by providing a buffer between a pallet racking upright and the forklift or palletised stock. They are available in several diffe 

Selective Pallet Racking is a cost effective system providing direct access to all pallet loads. It maximises space, allowing easy access to each pallet and is adjustable to meet individual storage requirements. 

Splice kits are designed to extend the storage height of the existing frames. 

Tyre Racking is designed to optimise the storage of various tyre sizes and provide easy access and display of the product.These racks are available in fixed or adjustable beam systems to suit all manner of tyres.